1)
Slide the ferrule onto the cable and strip the cable to the dimensions
as shown, taking care not to nick the centre conductor or braid.
|
2)
Open the cable braid and slide the insulator tube over the dielectric
and under the braid. Insert the cable into the body, ensuring that the
cable braid is on the outside of the connector mandril and that the
centre core locates in the internal mounting post. Slide the ferrule
forward and crimp.
|
3) Solder the centre core of the cable to the mounting post and screw in the end cap.
| | Crimp Hex. Sizes | 5.41mm Hex., Solder centre core |
|