Page d'Accueil
 Qui sommes nous?
 Contact

Part Number: BN62-0179-C06-Z
BN62-0179-C06-Z
Details & Specifications

DescriptionBNC HDTV Crimp Panel Mount Jack - Front Entry
To Fit Cable TypesRG179
Fixing MethodCrimp
BodyBrass, Nickel Plated
ContactBrass, Gold Plated
DielectricPTFE
FerruleBrass, Nickel Plated
InsulatorPTFE
LocknutBrass, Nickel Plated
TubeBrass, Nickel Plated
WasherSS41
Cable RetentionEqual to breaking strain of cable
Dielectric Withstanding1500V RMS Maximum
Durability500 mating cycles
Impedance75 ohms
Max. Frequency3 GHz
Temperature Range-65 to +165 degrees C
Working Voltage500V RMS Maximum
Maximum Panel Thickness3.2mm (inc. solder tag)
3.5mm (exc. solder tag)
Additional InformationSuitable for HDTV and other high frequency 75 ohm applications.

Return Loss [VSWR]

500MHz - 35.90dB [1.04]
1000MHz - 29.40dB [1.07]
2000MHz - 21.50dB [1.19]
3000MHz - 19.00dB [1.25]
Technical Illustration
BN62-0179-C06-Z
Panel Fixing Information
Cut-out DimensionsA=8.90mm, B=9.65mm

Assembly Instructions
Strip DimensionsA=6.0mm, B=5.0mm, C=4.0mm


1) Slide the ferrule onto the cable and strip the cable to the dimensions as shown, taking care not to nick the centre conductor or braid.
2) Slide the tube over the dielectric but under the braid and then push the disc over the centre core. Crimp the contact onto the centre core and slide into the body until it captivates, ensuring that the cable braid is on the outside of the connector mandril.
3) Slide the ferrule forward and crimp.
Crimp Hex. Sizes4.52mm Hex., 1.69mm Hex.