Page d'Accueil

Qui sommes nous?

Contact

Part Number: BN02-0179-C06-Z

Details & Specifications

Description BNC HDTV Crimp Bulkhead Jack, Hex. Flange To Fit Cable Types RG179 Fixing Method Crimp Body Brass, Nickel Plated Contact Brass, Gold Plated Dielectric Delrin Gasket Rubber Insulator PTFE Locknut Brass, Nickel Plated Tube Brass, Nickel Plated Washer SS41, Nickel Plated Cable Retention Equal to breaking strain of cable Dielectric Withstanding 1500 Volts RMS Maximum Impedance 75 ohms Max. Frequency 3 GHz Temperature Range -55 to +85 degrees C Working Voltage 500 Volts RMS Maximum Additional Information Suitable for HDTV and other high frequency 75 ohm applications.

Technical Illustration

Panel Fixing Information

Cut-out Dimensions A=12.00mm, B=12.90mm

Assembly Instructions

Strip Dimensions A=6.6mm, B=4.6mm, C=4.8mm 1) Slide the ferrule onto the cable and strip the cable to the dimensions as shown, taking care not to nick the centre conductor or braid. 2) Open the cable braid and slide the tube and then the small insulator over the dielectric and under the braid. Crimp the contact onto the centre core and slide the contact into the body until it captivates, ensuring that the cable braid is on the outside of the connector mandril 3) Slide the ferrule forward and crimp. Crimp Hex. Sizes 4.52mm Hex., 1.69mm Hex.